Skip to content
How to Set Up a Cooling Dog Bed: Filling, Placement, and First Use

How to Set Up a Cooling Dog Bed: Filling, Placement, and First Use

Bringing home a cooling dog bed sounds simple: unpack it, put it on the floor, and let your pup get comfy. But water-filled beds need a little extra prep, and even the right bed may not work as expected if you place it in direct sunlight or on a surface that traps heat.

Whether you're setting up a new bed, getting your patio ready for warmer weather, or helping a skeptical pooch adjust, a little preparation goes a long way.

The key is to follow the manufacturer's instructions, choose the right location, and give your dog time to adjust. Here's how to set up a dog cooling bed for safe, comfortable use.

How do you set up a cooling dog bed?

To ensure a cooling mat is safe for your dog, fill a water-cooled bed according to the manufacturer's instructions, ideally where it will stay. Place it in full shade on a cool, hard, smooth surface with good airflow, away from busy walkways and sharp objects. Supervise puppies and dogs that chew unfamiliar items, and regularly check beneath the bed for moisture.

Before first use: Filling and setting it up

Know which type of cooling bed you have

Wondering, “How does a dog cool mat work?” We’ve got you covered!

Cooling beds work in different ways. Some use gel or specialized fabrics, while others use water to absorb body heat and release it into the surrounding air. Elevated cooling cots allow air to circulate beneath your dog.

Water-filled beds need more preparation than many lightweight mats. Fill them correctly, place them on a suitable surface, and check them before use.

How to fill a water-cooled dog bed

K&H's Cool Bed III and Coolin' Comfort Bed require different amounts of water depending on their size. These quantities apply only to these specific products.

Bed size

Cool Bed III

Coolin' Comfort Bed

Small

1–1.5 gallons

1.5–2.5 gallons

Medium

2–3 gallons

2.5–3.5 gallons

Large

4–6 gallons

4–6 gallons

Follow these steps to set up your bed:

  • Choose the final location. A filled bed can be heavy. Depending on the size, a full Cool Bed III weighs approximately 12–50 pounds.

  • Protect the floor. Place a towel under the fill cap to catch drips. Never use the bed on surfaces that water could damage, such as carpet or hardwood.

  • Add water. Follow the instructions for your specific model and size.

  • Distribute the water. Gently knead the bed to help water spread through the core.

  • Release trapped air. Use the air valve as directed in the product instructions.

  • Check the feel. Make sure the bed feels evenly filled before your dog uses it.

Avoid lifting or moving a full water bed by its corners, which can strain the material.

What about cooling pads and cots?

Lightweight pads and elevated cots generally need less setup, but you should still follow their individual instructions. Place a cooling cot on a level, stable surface and check that its frame and feet are secure.

Don't assume every cooling product can be refrigerated or frozen. Our water-cooled beds don't require refrigeration and must never freeze.

Where should you place a cooling dog bed?

Placement is one of the most important parts of setting up a cooling dog bed. Water-cooled beds release absorbed heat into the surrounding air, so their performance depends partly on the temperature of the space around them.

Choose shade and a cool surface

Place the bed in full shade, whether indoors or outside. Direct sunlight can heat the bed and its surroundings, making the location less comfortable for your dog.

Tile, linoleum, and concrete can be good choices for water-cooled beds. These surfaces tend to stay cooler for longer, which can hold more heat.

Make sure the surface is smooth and level, with no sharp stones, debris, or other objects underneath that could puncture the bed.

Make room for airflow

Good air movement helps a water-cooled bed release heat. Choose an open area with natural airflow or a comfortable indoor space with a fan or air conditioning.

We recommend using our Cool Bed III and Coolin' Comfort Bed in temperatures below 100°F. Use the Coolin' Pet Cot below 95°F. 

Leaving a water-cooled bed indoors overnight in an air-conditioned room can help it cool before outdoor use the following morning.

Use this outdoor setup checklist

Before using a cooling dog bed outdoor, make sure:

  • The bed is in full shade

  • The surface is smooth and free of sharp objects

  • The temperature is within the product's stated limit

  • Fresh water and a regular resting spot are nearby

  • Check beneath the bed for moisture

Keep the bed out of busy walkways to reduce the chance of trips or accidental damage.

Getting your dog to use the cooling bed

You've filled the bed and found the perfect spot. Now comes the tricky part: getting your pup to use it. Some dogs hop onto a new bed immediately. Others need time to investigate something unfamiliar. Try these simple approaches:

  • Put it where your dog already rests. Start near a favorite lounging spot rather than introducing the bed in an area your pet rarely uses.

  • Let your dog explore. Give them time to sniff the bed. Reward calm curiosity or voluntary steps onto it with praise or a small treat.

  • Keep the location consistent. Leave the bed in the same spot for a few days so your dog can get used to it.

  • Check for chewing and wear. Supervise puppies and dogs that chew unfamiliar items. Keep nails trimmed and inspect the bed regularly. Avoid products the manufacturer doesn't recommend for dogs prone to chewing.

Remember, a cooling bed is a comfort product, not a treatment for heatstroke. If your dog shows signs of heatstroke or distress, such as excessive panting, reddened gums, weakness, or collapses, seek veterinary care immediately.

Choosing the right K&H cooling bed

The best cooling bed depends on where your dog rests and how much setup you're comfortable with.

Product

Type

Setup considerations

Temperature guidance

Cool Bed III

Water-filled bed

Fill by size; distribute water and release trapped air

Below 100°F

Coolin' Comfort Bed

Water-filled orthopedic bed

Fill by size; not recommended for destructive pets

Below 100°F

Coolin' Pet Pad

Lightweight cooling pad

Follow instructions; can sit on top of a pet bed

Follow product guidance

Coolin' Pet Cot

Elevated cooling cot

Use on a level surface; check the frame

Below 95°F

All four products use no electricity and contain no toxic gels. However, designs and setup requirements differ, so check the instructions for your chosen model.

A water-filled bed may suit a dog that likes stretching out on a cool surface, while a lightweight pad can add a cooling surface to an existing pet bed. An elevated cot offers a different resting style, with airflow beneath the sleeping surface.

Compare styles in K&H's Cooling Dog Beds & Pools collection.

FAQs

Where should I put a cooling dog bed?

Choose a shaded, well-ventilated spot on a cool, hard surface such as tile or concrete. Avoid direct sunlight, busy walkways, and sharp objects underneath the bed. Follow the temperature limits for your specific model.

Do you need to fill a cooling dog bed with water?

It depends on the design. K&H's water-cooled beds need water added before first use, following the instructions for the model and size. Other cooling mats may use different materials and may not require filling.

Can you put a dog cooling mat in the fridge?

Follow the cooling mat for dogs manufacturer's instructions. K&H's water-cooled beds don't need refrigeration and should never freeze. Leaving one indoors overnight near air conditioning can help prepare it for outdoor use the next day.

Can a dog sleep on a cooling mat all night?

A non-electric water-cooled bed can remain available overnight indoors when used according to the manufacturer's instructions. Leave a regular bed nearby so your dog can choose another resting spot, and check underneath for moisture.

Can I put a cooling pad on top of my dog's regular bed?

Some pads are designed for this purpose. You can place K&H's Coolin' Pet Pad on top of a pet bed. Keep it flat so water distributes evenly, and make sure your dog can move off it whenever they want.

Shop K&H cooling dog beds

A little planning can make your dog's cooling bed more comfortable and easier to use. Fill water-cooled models correctly, choose a shaded location with good airflow, and give your pup time to adjust. Most importantly, follow the instructions and temperature limits for your specific product.

Explore our Cooling Dog Beds & Pools collection to find the best product to keep your pooch cool indoors and outdoors all year long.

 

Previous article Heated Cat Bed Size and Placement Guide
Next article How to Set Up a Cat Bed Safely