Skip to content

K&H Thermo-Pond Perfect Climate Deluxe Pond Deicer

Sold out
Original price $91.99
Current price $64.98
Size
  • New & improved cage design!
  • Use submerged or floating
  • Choose from multiple wattage options--see our Zone Chart for assistance in determining proper wattage
  • Won't damage pond liners, use safely in all ponds
  • Simple to clean & maintain
  • 12 ft. cord
  • MET Safety Listed
  • Warranty: 2-years
!

Description

K&H has 'reinvented the wheel' when it comes to keeping ice free water available in winter ponds.

All K&H Deluxe Pond Deicers are safe in all pond, they will not damage pond liners, plastic ponds, or your fish.

Not everyone wants a floating deicer, K&H Deluxe Pond Deicers can be transformed from floating to submersible in seconds.

Each K&H Perfect Climate Deluxe Pond Deicer features a 12 feet cord for easy placement virtually anywhere in your pond.

K&H Perfect Climate Deluxe Pond Deicers are MET Listed for safety & include a 2-year manufacturer's warranty.

Thermostatically controlled

All K&H Deluxe Perfect Climate deicers are thermostatically controlled. This means they will automatically turn on and off as needed to keep the water in your pond from freezing over.

Please note: These deicers will maintain a pond temperature of just above freezing and cannot be adjusted to higher temperatures.

Finding the deicer that is right for me

K&H has solved the problem of having to use those high wattage deicers by creating a whole line of de‐icers along with a convenient zone chart for you to choose the correct de‐icer. (See the K&H Pond Chart below) Simply find your zone and use the chart to match up your pond size to find the deicer that is perfect for you.

**Warning: Deicer must be in water at all times. Do not operate when heating element is not fully submerged in water.

 
  K&H Perfect Climate Deluxe Pond Deicer - 250 Watt K&H Perfect Climate Deluxe Pond Deicer - 750 Watt K&H Perfect Climate Deluxe Pond Deicer - 1500 Watt K&H Thermo-Pond 3.0 - 100 Watt K&H Perfect Climate Submersible Pond Deicer- 300 Watt
Wattage 250 Watt 750 Watt 1500 Watt 100 Watt 300 Watt
Diameter 6" Round 6" Round 9" Round 12" Round 9" Round
Cord Length 12' cord 12' cord 12' Cord 12' cord 12' cord
Thermostat Type Internal - Preset Internal - Preset Internal - Preset Internal - Preset Internal - Preset
Floating or Submersible Floting & Submersible Floating & Submersible Floating & Submersible Floating Only Submersible Only
Safety Listing MET Listed MET Listed MET Listed MET Listed MET Listed
Warranty 2 Year Waranty 2 Year Warranty 2 Year Warranty 1 Year Warranty 2 Year Warranty
Recommended Pod Size Use Chart Below Use Chart Below Use Chart Below Up to 1,000 gallons per deicer Up to 300 gallons & 18" deep or less

Pond Deicer Temperatures Chart

Care & Instructions

Float or Submerse

To use your Thermo-Pond as a floating de-icer, use it with the float ring attached. To use it as a submersible de-icer, unscrew and remove the attached float ring.

Already Frozen Ponds Using an Ice Auger

  • If ice has already formed on the surface of your pond, drill a hole in the ice with an ice auger. Do not chop through ice as the shock waves can damage or kill your fish.
  • Then place your heater through the hole and run your cord to a properly grounded outlet protecting the cord from damage.


Without an Ice Auger

  • If you do not have access to an ice auger, place a large pan or bucket with water on the surface of the ice. Place your heater into the container and plug the heater into a properly grounded outlet. The heater will heat the water and container, melting a hole in the pond ice.


Safety

  • Always keep safety as your number one priority. Never walk on thin ice.
  • Please consult your pond professional on tips for overwintering fish.

Product Q&A

At what temperature should the de-icer turn on?

Our Thermo-Pond units are thermostatically controlled to keep the average water temperature just above freezing. They feature internal thermostats and will turn on and off as necessary to keep the pond from freezing over.

How do I determine which wattage model I need?

To determine the proper wattage for your pond size and climate, please consult our Zone Chart.

What happens if I use a higher wattage deicer than needed in my pond?

The deicers are thermostatically controlled. This means, as long as you purchased the minimum wattage required for your zone and pond size, they will work fine.

Keep in mind that higher wattage models will use more electricity than the lower wattage models. For example, the 750 watt deicer will use three times the amount of electricity when running versus the 250 watt deicer.

There is a piece of Styrofoam in the ring. Do I leave it in?

To use this product as a floating de-icer, leave the float ring attached. To use it as a submersed de-icer, simply unscrew and remove the float ring.

Will my fish be safe with this deicer in the pond?

Your fish are quite safe, even when they do come in contact with the heating element of the deicer. The heating element will never get hot to the touch as long as it is submerged in water. You can actually reach down into the water and put your finger on the heating element and it will not burn you.

Please rest assured that your fish are quite safe when the Thermo-Pond Perfect Climate deicer is in the water. In the middle of winter when it gets really cold you’ll find your fish huddling around the deicer to keep warm, but the deicer will never harm them.

When my pond de-icer runs, foam forms on top of the water. Is this normal?

Yes, the foam buildup is harmless and completely normal for this product. The difference in temperature between the water inside the ring and the water outside the ring creates foam, which is why there is no foam buildup when the deicer is off.

How can I test my pond de-icer outside of a pond?

You can test the Thermo-Pond by placing it in the freezer for about an hour. Then remove the Thermo-Pond and plug it directly into an outlet. Hold onto the inside of the ring of the bottom half of the Thermo-Pond. It will begin to warm within about 5 minutes and will shut off automatically shortly after.

Does the cord actually sit in the water?

Yes, the cord does come out of the bottom of the deicer and will be in the water. If the cord were placed outside of the water, it would tip the unit sideways, causing the heating element to be exposed to the air, which is not desirable. The heating element must always be completely submerged under water to keep it cool.

My pond has leaves on the bottom from the fall. Should I clean them all out?

Yes, you need to clean all the dead leaves out of the bottom of the pond. The leaves will decay and lower the amount of oxygen available in the pond, reducing the chance of the fish in the pond surviving through the winter. Also, the decaying leaves will begin to produce an unpleasant bacteria, which you will be able to smell when you clean them out.

Does this model have an indicator light or anything visible to tell that it is on?

While our pond de-icers do not have indicator lights, they are thermostatically controlled to turn on and off as needed.

How long is the cord?

The cord is 12 feet long.

Can I use an extension cord with this product?

MET requires that all manufacturers put the extension cord statement “Do not use with extension cord” on every item that is MET listed by UL 499 standards. This is because they cannot test every extension cord on the market in conjunction with our products for safety. Also, MET suggests that an extension cord is not recommended as a permanent fixture and should only be a temporary solution when using any electrical product.

For more information on MET safety testing, please visit their website at www.metlabs.com.

How long can a heated product be plugged in?

MET Safety Laboratories suggests unplugging the product if you leave your home on an extended vacation, as they do with any electrical appliance. Otherwise, it is designed for 24/7 operation and you can leave it plugged in all day. This item has been certified by MET labs to adhere to strict electrical safety standards. For more information, please visit www.metlabs.com.

Is there an off/on switch?

There is not an off/on switch. It is always on when plugged in.