Skip to content
Heated Pet Bed Troubleshooting: What to Check, Symptom by Symptom

Heated Pet Bed Troubleshooting: What to Check, Symptom by Symptom

You expect a heated pet bed to feel warm, so it can be confusing when you touch it and barely feel any heat. Maybe it's a new bed you're testing for the first time, or a favorite bed that doesn't seem as warm after washing. Before you assume the bed isn't working, there are a few things worth checking.

A heated pet bed may feel cool when it's working normally. The way it heats, how the heater is positioned and what sits between your pet and the heat source can all affect how warm it feels. This guide walks you through how to test the bed, check the setup and troubleshoot common problems, plus the signs that mean it's time to stop using it.

Question: Why is my heated pet bed not working?

Quick Answer: Most heated pet beds stay only slightly above room temperature until a pet lies on them, so an empty bed often feels cool. If it stays cold under a pillow, check that the heater is inside the bed and seated correctly, that the bed is plugged straight into a wall outlet, and that the cord is undamaged.

Start by checking whether the bed is actually heating

Before you move the bed, reassemble anything or assume something has gone wrong, check whether it's producing heat. K&H recommends a simple pillow test that takes about 20 minutes. If the area under the pillow feels warm but not hot, the bed is working.

If you feel warmth, the bed is working. What feels like a problem may simply be how the bed is designed to heat, how it's set up or how much warmth is reaching your pet. If the area under the pillow stays completely cold, you can move on to checking the power and heater.

For more detail, see K&H's guide to how to test your heated pet bed.

If the bed feels cool when your pet isn't using it

An empty heated bed can feel surprisingly cool to your hand, and that's not necessarily a sign that anything is wrong. K&H heated beds use a pet-activated thermostat rather than constantly heating to a high temperature. When the bed is empty, the surface stays about 10 to 15°F above room temperature. Once your pet settles in, their body holds the warmth against the surface, allowing the bed to warm to about their natural body temperature, roughly 102°F.

In other words, your hand isn't a very good stand-in for your pet. The bed is designed to provide gentle, sustained warmth rather than feel hot when you touch it.

As K&H's common questions about heated pet beds explains, K&H heated beds don't have an on/off switch or pressure sensor. If you're wondering whether it's okay to leave one plugged in, K&H explains more about whether heated beds are safe to leave plugged in.

If your pet's bed doesn't have a cord at all, it may be a self-warming bed rather than a heated bed. Self-warming beds don't generate heat. Instead, they reflect your pet's own body heat back toward them.

If the bed stopped feeling warm after washing

If the bed worked before washing and feels cold afterward, start with the parts that were removed during cleaning. On K&H beds with removable heaters, the heater needs to be taken out before washing and put back correctly once everything is completely dry.

Before plugging the bed back in:

  • Unplug the bed: Always disconnect it before removing or replacing the heater.

  • Make sure the heater is back in place: It's easy to forget this step after washing.

  • Check the position: The heater should lie flat and in the correct position, with the cord exiting from the back of the bed as directed.

  • Let everything dry completely: The cover and heater should be completely dry before the bed is reassembled.

  • Plug it directly into the wall: Then give the bed another 20 minutes and repeat the pillow test.

This applies to several K&H beds with removable heaters, including the Thermo-Kitty Bed, Thermo-Pet Mat, Thermo-Snuggle Cup, Thermo-Pet Lounge Sleeper, Thermo Pet Cuddler and Thermo Pet Sofa.

If the bed is warm but your pet still seems chilly

A bed can pass the pillow test and still not feel especially warm to your pet. Before assuming the heater isn't doing its job, take a look at what's between your pet and the heat source and where the bed is sitting.

A few simple changes can make a difference:

  • Give the warmer a proper bed: A K&H bed warmer is designed to be used inside a pet bed, with cushioning between the heater and your pet.

  • Check for extra layers: A thick blanket or cushion between your pet and the heater can reduce how much warmth reaches them. If you've added extra bedding, try removing a layer.

  • Move the bed away from cold surfaces: A low-wattage heated bed provides gentle warmth, so a bed sitting directly on cold tile or in a chilly basement may not feel as cozy. Try moving it to a warmer, draft-free spot and off the cold floor.

  • Give your pet time to warm up to the bed: Some pets need a little encouragement before they decide a new bed is their favorite place to nap. Try placing it somewhere they already like to rest.

The goal isn't for the bed to feel hot. It should provide a gentle source of warmth that your pet can comfortably settle into.

If the bed stays completely cold

If the pillow test shows no warmth at all, check the simple things first. The issue may be with the power source or the way the heater is positioned rather than the bed itself.

Try these steps:

  • Check the outlet: Plug a lamp or phone charger into the same outlet to make sure it is working.

  • Plug the bed directly into the wall: Don't use a power strip or extension cord as a permanent setup for a heated pet bed. The Electrical Safety Foundation International notes that extension cords are a temporary solution, not a long-term part of your home's electrical system.

  • Check for a switched outlet: Some outlets are controlled by a nearby wall switch. Also check your circuit breaker if the outlet isn't working.

  • Reconnect the bed: Unplug it and plug it back into the wall outlet. K&H heated beds don't have a separate on/off switch.

If you've seen troubleshooting advice about resetting a controller or looking for blinking lights, keep in mind that those instructions are generally for human heating pads and blankets, not K&H pet beds.

When to retire a heated pet bed

Not every problem with a heated bed means you need to replace it. But some signs aren't worth troubleshooting. If something about the bed looks or smells wrong, unplug it and stop using it.

Look for:

  • A damaged cord: Chewing, cracking, fraying or other visible damage.

  • Scorch marks or a burning smell: Don't keep using the bed just because it still seems to heat.

  • A surface that feels hot: A heated pet bed should feel warm, not hot.

  • A bed that won't heat: If you've confirmed the outlet works, the heater is positioned correctly and everything is completely dry, the bed may need to be replaced.

Don't attempt to repair a heated pet bed yourself or substitute a human heating pad. K&H's testing guidance and the American Kennel Club both caution against using human heating pads for pets because they can become too hot.

Many K&H heated beds carry a 1-year limited warranty, so if yours is still covered, contact K&H before replacing it.

Choosing a K&H heated bed or replacement warmer

Sometimes the simplest solution is a fresh start, especially if your pet has loved their bed for years and it's reached the end of its life. K&H offers several indoor heated beds and a standalone warmer that can bring heat to a bed your pet already loves.

Each indoor heated option is thermostatically controlled and designed for standard 120V household use. They're intended for indoor use, so if you're looking for warmth for an outdoor cat, see our guide to seasonal care for a heated outdoor cat house.

Product

Watts

Size

Removable heater

Washing note

Thermo-Kitty Bed

4 W

16 or 20 in diameter

Yes

Remove the heater; machine wash the cover and cushion, hand wash the foam ring

Thermo-Kitty Mat

6 W

12.5 x 25 in

Yes

Remove the heater and cover for washing

Thermo-Pet Mat

6 W

14 x 28 in

Yes

Remove the heater before machine washing

Thermo-Pet Lounge Sleeper

Small 4 W; Medium 7 W

Small for pets up to 20 lb; Medium for pets up to 40 lb

Yes

Remove the heating pad, then wash

Pet Bed Warmer

4, 6, 13 or 22 W by size

Fits inside an existing bed

Not applicable; the warmer is the heater

Wipe clean with a damp cloth; do not machine wash

 

If your pet already has a bed they love, you don't necessarily need to replace the whole thing. A Pet Bed Warmer can add gentle warmth to an existing pet bed. If you're choosing a new bed, start with your pet's size and sleeping style, then consider whether a removable heater will make cleaning easier.

Frequently asked questions about heated pet beds

Once you've checked the basics, these common questions can help you figure out what's normal, what needs a closer look and when it's time to replace the bed.

Why is my heated pet bed not warming up?

Start with the pillow test. An empty thermostat-controlled bed can feel cool to your hand because it provides gentle warmth rather than staying hot when no pet is using it. If the area under a pillow still feels completely cold after about 20 minutes, check that the heater is positioned correctly, everything is completely dry and the bed is plugged directly into a working wall outlet.

How do I know if my heated pet bed is broken?

If the bed stays completely cold during the pillow test after you've confirmed that the outlet works and the heater is dry and positioned correctly, it may need service or replacement. Stop using the bed immediately if you notice a damaged cord, scorch marks, a burning smell or a surface that feels hot.

Why does my heated pet bed only feel warm in one spot?

That's usually expected. The heater warms the area directly above it rather than heating the entire bed evenly. If the warm area is noticeably off-center, however, check the position of a removable heater. Unplug the bed first, then reseat the heater according to the product instructions.

Why did my heated pet bed stop working after I washed it?

Check the heater first. It may not have been put back into the bed, may have shifted out of position or may not be completely dry yet. Unplug the bed, make sure the heater and cover are completely dry, reseat the heater according to the instructions and repeat the pillow test.

Is a heated pet bed covered by warranty if it stops working?

Many K&H heated beds come with a 1-year limited warranty, according to their product pages. If your bed stops working, keep your proof of purchase and contact K&H before replacing it. This is especially helpful if the bed still fails the pillow test after you've checked the heater, outlet and cord.

Find the right K&H heated bed for your pet

If your pet's favorite bed has finally reached the end of its life, choosing a replacement is about more than finding one that gets warm. Consider your pet's size, sleeping style and where you'll use the bed, then choose a shape and size that gives them plenty of room to settle in comfortably.

K&H makes thermostatically controlled heated beds and mats for cats and dogs in a range of sizes. Explore the K&H indoor heated dog beds or indoor heated cat beds to find an option that fits your pet and their favorite place to nap.

 

Previous article Troubleshooting Your Dog's Crate Pad: Common Problems and How to Fix Them
Next article Are heating pads safe for cats and dogs?