Skip to content
Pet Bed Warmer - Large

K&H Pet Bed Warmer - Gray

Sale
$56.99
$39.98
Size
  • CALMING THERAPEUTIC TEMPERATURE: This safety listed low wattage thermostatically controlled cat and dog bed warmer automatically adjusts to the perfect temperature for pets and can comfort pets with joint issues such as arthritis and hip dysplasia
  • PET BED WARMER USE: Insert the waterproof pet heating pad into your pet's favorite indoor dog bed or cat bed to create a pet warming oasis
  • AUTOMATIC HEAT CONTROL: The heated pet warmer is thermostatically regulated to automatically adjust to your pet's natural body temperature when they are in the bed, and stays slightly above the ambient air temperature when the bed is empty
  • SAFETY LISTED: K&H products are safety certified, providing peace of mind with electrical safety standards that go beyond UL safety requirements; we don't just use safety-listed parts, we safety certify the entire product, ensuring unparalleled safety
  • 4 ENERGY-EFFICIENT SIZES: The K&H Pet Bed Warmer is available in 4 sizes using between 4 - 22 watts of power, ensuring low energy consumption while providing cozy warmth for your pet
  • COLORADO BRAND YOU TRUST: Designed by K&H with over 25 years of experience in creating safe, innovative, quality products for pets, ensuring safe reliability and top-tier craftsmanship for pet parents
!

Description

With multiple size Pet Bed Warmers available, it's now possible to add heat to most indoor pet beds. It slides into any zippered dog or cat bed and is recommended for beds with at least ½ inch of padding between the warmer and bed surface. Simply plug it in and the warmer will generate a subtle, comfortable heat that any pet is sure to enjoy.

Please Note: This is a Pet Bed Warmer, it should only be used inside of a pet's bed and should never come in direct contact with your pet.

Thermostatically Controlled Temperature

Internal thermostats automatically adjust the Pet Bed Warmer's temperature as needed to create a comfortable resting area for dogs and cats. They're pre-set to heat to your pet's natural 102°F body temperature when he/she lies on the pad. When plugged in but not in use, the Pet Bed Warmer will maintain a temperature 10-15°F greater than the ambient room temperature.

The Pet Bed Warmer is the essence of simplicity and has no on/off switch to monitor. Plug it in and the product will begin to warm automatically. Its soothing, gentle heat will not exceed the natural body temperature of a dog or cat, allowing your pet to enjoy hours of warmth.

Multiple Size Options

We've expanded the Pet Bed Warmer lineup to accommodate the needs of dogs and cats of all sizes. Now you can select the size that fits your pet's bed most closely.

Low Power consumption

Our product engineers have worked tirelessly to minimize the power consumption of our best-selling Pet Bed Warmers while maximizing their heat output efficiency. Every size Pet Bed Warmer uses less energy than most light bulbs, helping keep your electrical bills low.

Safety-Tested

The K&H Lectro-Soft has been tested rigorously and certified by MET Labs. Their certification means this product adheres to strict electrical safety standards.

Pet Bed Warmer Combos

For pet owners seeking an all-in-one heated bed solution, we offer indoor heated dog beds and indoor heated cat beds. They combine the warmth of a Pet Bed Warmer with the comfort of a K&H dog or cat bed.

Key Specifications

  • Heated: Yes
  • Thermostatically Controlled: Yes
  • Pre-Set Temp: 102°F (bed surface temperature when in a pet bed)
  • Cord Length: 5.5 ft.
  • Outdoor Use: No
  • Outer Material: Vinyl
  • Safety Listing: MET
  • Small – 9.25" x 10.25"
  • Medium – 6.75" x 20.5"
  • Large – 11.75" x 24.5"
  • X-Large – 16.5" x 26.5"
  • Small – 4 watts
  • Medium – 6 watts
  • Large – 13 watts
  • X-Large – 22 watts

Care & Instructions

Cleaning Instructions

Unplug and remove the Pet Bed Warmer from any pet bed prior to washing the bed.

DO NOT place this item in the washing machine. It should be wiped clean with a damp cloth.

Testing Your Pet Bed Warmer

You can test the Pet Bed Warmer by inserting the warmer in a pet bed and placing a large pillow on top of the bed. After about 20 minutes, feel under the pillow. It will feel warm, not hot. DO NOT use an extension cord during this test.

The surface of the bed will be about 15°F above ambient air temperature until the pet lies on the bed. Then it will warm to about 102°F, which is the natural body temperature of dogs and cats.

Product Q&A

What is the difference between a human heating pad and a Pet Bed Warmer?

The Pet Bed Warmer provides a subtle heat and reaches a maximum temperature of 102°F, which is the natural body temperature of dogs & cats. A regular human heating pad will be much too warm and could damage a pet's skin and cause him/her to be afraid of the heat source.

Does the Pet Bed Warmer need to be placed inside a pet bed?

Yes, the Pet Bed Warmer should always be placed inside a pet bed. It should never be used by itself.

How much bedding should be between the Pet Bed Warmer and a pet's body?

There should be at least ½” of padding between the warmer and a pet's body.

What temperature will a bed reach with the Pet Bed Warmer inside?

The surface of the bed that contains the Pet Bed Warmer will be about 15°F above ambient air temperature until the pet lies on the bed. Then it will warm to about 102°F. The surface temperature depends on how much padding is on the pet bed. If there is a lot of padding, it will be cooler. If the padding is thinner, the surface will be warmer.

Could I use the Pet Bed Warmer outdoors if it's covered and out of the snow?

While our Pet Bed Warmer is an excellent product, it is not designed to output enough heat for the cold outdoor temperatures of winter. Rather, it is designed to elevate the temperature of a pet’s bed that is already around room temperature.

For outdoor pets, we recommend the Lectro-Soft Outdoor Heated Bed, Lectro-Kennel, Extreme Weather Kitty Pad, or one of our other outdoor heated beds or pads. These are made for the outdoors and will provide enough heat for an outdoor setting during the cold winter months.

Does it matter which side of the Pet Bed Warmer faces up?

For this particular product, it does not matter which side faces up.

Do you have covers for these Pet Bed Warmer?

We do not make covers for the Pet Bed Warmer. It should be placed inside a pet bed with at least ½” of padding between the warmer and a pet’s body.

Are the bed warmers waterproof? We want to use them for a whelping bed.

The Pet Bed Warmer is water-resistant. It can be wiped clean with a damp cloth.

For whelping puppies, you may wish to consider our Deluxe Lectro-Kennel. Its ABS plastic exterior is easy to clean and it features an adjustable thermostat.

How long is the cord?

The cord is 5.5 feet long.

Are your heated beds and pads pressure sensitive?

Our beds and pads are NOT pressure sensitive. All K&H heated beds and pads feature dual thermostats and are designed to warm to your pet's normal body temperature when he/she lies on the pad. This is a function of the insulation provided by a pet’s body, not the weight of the pet.

K&H beds and pads will emit heat anytime they are plugged in so your pet can sense that heat and be drawn to the bed or pad for warmth and comfort. When your pet is not on the pad, the heat will dissipate into the air and the surface temperature will vary according to the ambient air temperature.

Can I use an extension cord with this product?

MET requires that all manufacturers put the extension cord statement “Do not use with extension cord” on every item that is MET listed by UL 499 standards. This is because they cannot test every extension cord on the market in conjunction with our products for safety. Also, MET suggests that an extension cord is not recommended as a permanent fixture and should only be a temporary solution when using any electrical product.

For more information on MET safety testing, please visit their website at www.metlabs.com.

How long can a heated bed or pad be plugged in?

MET Safety Laboratories suggests unplugging the bed if you leave your home on an extended vacation, as they do with any electrical appliance. Otherwise, it is designed for 24/7 operation and you can leave it plugged in all day. This item has been certified by MET labs to adhere to strict electrical safety standards. For more information, please visit www.metlabs.com.

Is there an off/on switch?

There is not an off/on switch. The pad is always on when plugged in.

For a garage, would you advise an indoor or outdoor heated product?

For a garage, we recommend outdoor heated products. They have the features necessary to ensure your pet stays warm in even the coldest of temperatures.

1-year Warranty
Download Product Manual